|
|
INTRODUCING THE R-8000 R8000 Communications System Analyzer
The new R8000 Communications System Analyzer provides the bench-top functionality of more than 16 communication test instruments combined into one compact, lightweight, unit. Designed for portability, the 14-pound analyzer can be set-up for remote operations, communicating and controlling the analyzer through an onboard, standard Ethernet port.
Features: - Test instruments functions include:
- High performance analyzer with markers
- Signal and audio generators
- Sensitive measurement receiver
- Eight instrument meters
- Scopes, counters and more
- Operation up to 3GHz
- Spectrum analyzer noise floor of less than -120dBm
- "Super-bright" 8.4-inch LCD display for easy daylight viewing
DOWN LOAD THE ENTIRE 2600 SERIES PDF >> GD 2600 SERIES PDF << Click On Note: Use your Browser Return Arrow to come back to this page!
R2600 Communications System Analyzer R2600 — For Conventional Radio and Paging Service
If you service conventional two-way radio or
one-way paging, the value-packed R2600 is the product for you. Because of its unique design, the R2600 allows you to perform numerous complex functions with the same piece of equipment. This “one-box” design is especially useful in remote sites or where use of multiple pieces of heavy equipment are impractical — or impossible. And now, the R2600 comes standard with a high performance spectrum analyzer with markers, freeze, peak hold and max hold features.
R2625C — Economical APCO Project 25 Solution
The most cost-effective Project 25 test solution
on the market, the R2625 is specifically configured for the needs of those servicing Project 25 along with conventional two-way analog systems. In addition to all of the test capabilities of the R2600, the R2625 comes standard with DES-OFB Project 25-compatible Type III encryption. The R2625 also contains Project 25 diagnostic test capability, and can be optionally expanded to include the following: - Tracking generator
- Cable fault testing
- Programmable test set-up memory
- Project 25 compatible type III encryption (AES, DES-XL, DVP-XL, DVI-XL)
- Project 25 trunking
- Automated test & alignment
Whatever your radio communication testing needs, the R2600 family includes a solution for you.
R2660 – Communications System Analyzer
Whether you're testing subscriber units or site
equipment, the R2660 offers the unique capability to test iDEN™ systems under actual TDMA operating conditions in either 6:1 or 3:1 format. Comprehensive diagnostic capabilities are provided to facilitate fault isolation and repair. In addition, the unit also provides dedicated screen displays for convenient observation or printout, innovative use of soft keys and windowing, fast reacting auto ranging scales with both analog and digital readouts, and signaling encode and decode function— all built into a versatile, rugged, and compact test unit designed specifically to meet the tough demands of the field service environment. In TDMA mode, the R2660 provides the following special measurement features: - Average power meter
- Frequency error meter
- SQE (Signal Quality Estimate)
- BER (Bit Error Rate)
R2670 – Expandable Platform for Digital, Trunked, and Secure Testing
In addition to including all the capabilities
found in the R2600, the R2670 FDMA
digital Communications System Analyzer is a special digital hardware platform that allows customized configuration to include multiple test capabilities in one convenient package. The R2670 includes as standard features: - Tracking generator
- Cable fault testing
- High performance spectrum analyzer with markers
- Programmable test set-up memory
R2670 OPTIONAL test capabilities: - SMARTNET/SmartZone™ Type I, I EP II, II
- Project 25 standard conventional (IMBE) and encrypted
- ASTRO™ conventional (VSELP) and encrypted
R2680 MPT1327 Trunking Communications System Analyzer General Dynamics is proud to announce the R2680 with MPT1327/1343 trunking test capability. If you calibrate, maintain, repair or design MPT trunked radios, the R2680 is for you. Because of the unique design of the R2600 family of Communications System Analyzers, the R2680 can perform many complex functions with one single piece of equipment. This “one box” design is particularly helpful in remote sites where multiple pieces of heavy equipment are either impractical or impossible. The R2680 is rugged enough to withstand heavy activity, and can also be operated from a variety of power sources, making it ideal for field use. The R2680 saves you time and helps you work more efficiently — improving your effectiveness and profitability. Whether for use in your shop, at your customer’s site or at a remote location, let the General Dynamics R2680 — and our experience — work for you. Features and Benefits The R2680 gives you cost and space savings. In addition to its comprehensive MPT1327 test capabilities, it does the job of each of these individual test instruments: - Signal Generator
- Measurement Receiver
- RF Scanner
- Spectrum Analyzer
- Duplex Generator
- Audio Frequency Counter
- AC/DC Voltmeter
- Digital Oscilloscope
- RF Wattmeter
- Signal Strength Meter
- SINAD Meter
- Distortion Meter
- Tracking Generator
- Signaling Simulator
The R2600 family of Communications System Analyzers is known for its user-friendly, efficient operation: - The display is organized into easy-to-read windows for quick comprehension of test results
- Test settings and results are displayed simultaneously, eliminating the need to switch between screens
- Soft Keys permit quick access to the many menu selections, simplifying test setups
- Built-in memory easily stores and recalls frequently used configurations
- Built-in help screens give instant access to user information
The end result is a product that combines the time-tested and field-proven quality and reliability of the R2600 family with extensive MPT1327 test capability: The R2680 from General Dynamics. MPT1327 FeaturesSignaling Types
Germany Regionet 43 Sub-bands D1 and D2, UK MPT1327 Band III Sub-bands I and II, Dutch Actionet, Italian Privatex, New Zealand PTC 253, French PAA 2424 VHF, French PAA 2424 UHF, and Finnish Autonet predefined. User configurable Signaling Types
Non-volatile storage of up to 10 user defined signaling types. Call sequence Tests
Radio and System Initiated: - Individual Call
- Group Call
- All Call
- PABX Call
- PSTN Call
- Status Message
- Short Data Message
MPT1327 Test Parameter Entries
(Dependent on Test Selection) - Signaling Type
- System ID
- Control Channel Number
- Traffic Channel Number
- Call Sequence
- Emergency Priority
- Call Set-up
- Radio ID2
(for System Initiated Tests) - Group ID
- Group Call Type
- Status Code
- Data Codewords
- Signaling Parameters
Test Measurement Display
(Dependent on Test Selection) - Radio ID
- Radio ESN
- Call Status Indicator
- Control Channel Frequency
- Traffic Channel Frequency
- Emergency Priority
- Group ID
- Group Call Type
- PABX Number
- PSTN Number
- Status Code
- Data Codewords
- Raw Telegrams (Storage for last 99)
- RF Performance Data
Auto Test Capability
Test up to 3 Traffic Channels for quick SINAD, Frequency Error, Frequency Deviation, and RF Power Measurements. Radio ID Decoding
MPT1327 Format: Prefix-Indent Current Software Version
Standard: V6.00P0
Additional Option (MPT): V2.00.P00
Display: V2.00.P00 |
Automated Test and Alignment Software AutoTest Software dramatically reduces test and alignment times for XTS5000™, XTS3000™ and ASTRO Saber™ portable radios, as well as ASTRO Spectra™ and ASTRO Spectra Plus™ mobile radios The new AutoTest software for the General Dynamics R2625 and properly equipped R2670 communications systems analyzers automatically tests and aligns Motorola XTS5000™, XTS3000™ and ASTRO Saber™ portable radios, as well as ASTRO Spectra™ and ASTRO Spectra Plus™ mobile radios. About AutoTest The AutoTest software runs on a Windows-compatible PC and communicates directly with both the radio under test and the communications system analyzer, thereby eliminating most operator intervention. Simple to use with an intuitive Windows interface, AutoTest permits non-skilled personnel to quickly and accurately test and align their Motorola digital radios. All results, including the radio model and serial numbers, are saved to the PC, providing valuable maintenance information. AutoTest Benefits - Significantly reduces test times
- Automatic download of radio parameters lessens possibilities of operator error
- Simple, user-friendly operation allows use by non-technical personnel
- Automatically saves test and alignment information, including radio serial number and softpot settings
- Ensures test repeatability and improved accuracy
Tests Performed - Transmitter BER (Bit Error Rate)
- Transmitter Reference Frequency
- Transmitter RF Power
- Transmitter External Voice Modulation
- Transmitter Internal Voice Modulation
- Receiver Distortion
- Receiver Noise Squelch
- SINAD (Sensitivity)
- Rated Audio
Automated Alignment Functions Performed - Reference Oscillator
- Transmit Deviation Balance/Compensation
- Transmit Deviation Limit
Current Software Versions - AutoTest for ASTRO Saber and XTS3000™ V1.2
- AutoTest for XTS5000™ V1.2
- AutoTest for ASTRO Spectra™ V1.1
- AutoTest for ASTRO Spectra PLus™ V1.1
Ordering Information The Automated Test and Alignment software is available from General Dynamics and its network of worldwide distributors. Start “losing wait” today. With AutoTest, you’ll notice the difference almost immediately.
|
|
|